Valken 7.4V 25C 250mAh Fusion Engine LiPo
Designed for use in Airsoft Fusion Engine Rifles
- Manufacturer: Valken
- Type: Lithium Polymer
- Volts: 7.4v
- mAh: 250mAh
- Style: Fusion Engine
- Connector: E-flite
- Rechargeable - special Li-Po Charger required
- High performance lithium polymer cells
- 20C continuous discharge rate
- Charge / Discharge Mini Tamiya connector and balancing connector
- No memory effect
Li-Po Battery Safety Guidlines: While all batteries can be dangerous if used improperly, Li-po batteries are a bit more unstable and less forgiving than traditional Nicad and Ni-MH batteries. Therefore extra caution should be exercised when using them to avoid potential personal injury and damage to property. 1. Li-po batteries MUST be charged with a Li-po battery charger. They can NOT be charged with a traditional battery charger. ALWAYS charge the battery in a fireproof environment on a non-flammable surface and NEVER leave the battery unattended while charging. 2. Take extra care not to short out, crush or puncture the battery. Doing so will result in the cells igniting. Before and after every use please inspect the battery to ensure there are no visible damage to the wires or cells which could cause a short circuit. 3. NEVER attempt to disassemble your battery or remove the shrink wrap from its cells. 4. Please ensure that the battery is never drained to the point that it can no longer function your AEG. If the batteries voltage is allowed to be drained low enough it will reduce the lifespan of the battery.
You Might Also Find These Cool....